antennas.us made products

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....

The UL-1400-D345USF is a versatile, Dual Band, US Cellular antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA connector...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO Model UL-1501-B347 is a lossless* (efficient), passive broadband antenna suitable for general two-way communications at any frequency from 500 MHz to 3.0 GHz, without any need for tuning. Other applications of this antenna include omnidirectional broadband receiving, spectrum monitoring, scanners, and low dispersion jamming. Its 50 Watt handling capability allows its use as a single-port, multi-function antenna, enabling multiple, simultaneous...

The UC-1574-341RS is a Quadrifilar Helix antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with L1 (1.5754 GHz) GPS receivers and systems. For embedded and weight sensitive applications (such as self-buoyant air and water platforms, like balloons and buoys), we offer a 30 gram (1 oz) lightweight version of the UL-1574-341R-LIGHT (select from above Base/Flange drop down menu). It is enclosed in a light housing, measuring 27.5 mm (1.08") OD x 99 mm (3.9") L, with an SMA Female connector at...

Mini-UHF LOS/SATCOM Mobile Antenna Description                                                                   NSN No. 5985015774974 (Black)Leadtime: Stock to 2 weeks ARO Click on graphs below to see full resolution image SPECIFICATIONS: NMO mounted UHF antenna. Designed to be vehicle mounted or to be used on a metallic...

The UL-1700-D345ISM is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

The UL-1700-D345ISF is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

The UL-1400-D345USM is a versatile, Dual Band, US Cellular antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA connector...

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....

A broadband, rugged, mobile radio antenna designed to service the whole 430-470 MHz UHF band, featuring a DC grounded radiating element. It may be used as a UHF Train Antenna on locomotives and Railroad related applications, such as End-of-Train Devices (EOT/ETD) or Head-of-Train Devices (HOT/HTD). It is also ideally suited as a Transit Antenna, for installation on buses, subway/metropolitan rail assets and stations, or as a Mobile Antenna in EMS (Emergency Medical Services), Law Enforcement,...

The UL-3502-438 is a rugged, wideband, omnidirectional, medium gain, linearly polarized antenna, covering the licensed WiMax 3.5 GHz band. It measures 4 cm/1.5" OD x 11 cm/4.5" H and can be used either indoors or outdoors. SPECIFICATIONS: Frequency range: 3.4-3.7 GHz Coverage: Omnidirectional in azimuth Polarization: Linear, typically mounted for Vertical polarization (VPOL) Gain: +5 dBil Nominal Impedance: 50 ohm (RF) Input Power: 10 Watt CW VSWR: 2.0 Connector: SMA, Female (select preference...

Leadtime: 4 Weeks ARO X-Band, Omnidirectional Antenna, Description This antenna was originally designed to be used by RACONs, or RAdar beaCONs: a device normally used to mark the location of a Lighthouse or a Marine Buoy, as an aid to maritime navigation. RACONs operate within the X-band range of 9.32-9.50 GHz. Traditionally, a RACON signal identified itself on a radar screen as a dash line, followed by a Morse Code signature. The SL-9402-386 was developed as the antenna component of a RACON...

Puzzle: Maze Download Puzzle (PDF)

Passive GLONASS, BeiDou, GPS, GNSS, Iridium Combination Antenna The UC-1614-341RM is a Quadrifilar Helix antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with GPS L1, 1.5754 GHz receivers, Russian GLONASS Navigation System and 1.6 GHz Iridium modems/transceivers. UC-1614-341RM Specifications: Frequency range: 1565-1585, 1600-1630 MHz Coverage: Hemispherical Polarization: Right-Handed, Circular (AR 3 dB) Gain: +2 dBic Nominal Impedance: 50 ohm (RF) Input Power: 1 Watt CW VSWR: 2.0 GRAPH...

Universal Type N Female connector Mount and Cable Assembly. Type N Female jack/receptacle at one end of LMR-195 coaxial cable (Teflon insulator, 0.2" OD). Select cable length and other end connector.

Model VL-1460-496 is a small Amateur VHF Antenna (145-148 MHz, 2m Amateur Radio Band), designed for mobile platforms (vehicles) with height restrictions. Measuring only approximately 4" (10 cm) in diameter and 6" (15.3 cm) tall, this antenna is a very efficient Low Profile radiator. When installed properly on the metal chassis of a vehicle, the VL-1460-496 will perform comparably with a full size 1/4 wave monopole antenna. For optimum operation, install near the center of a flat surface, such...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO TECHNICAL SPECIFICATIONS: Frequency range: 0.7-7.0 GHz Coverage: Broadside Polarization: Circular, RHCP or LHCP, depending on mounting orientation Gain: -2 to +2 dBic Nominal Impedance: 50 ohm (RF), Short Circuit (DC)* VSWR: 3.0 GRAPH Connector: SMA, Female Size: 31 cm (12") x 31 cm (12") x 1 cm (.4") NOTES: Does not require a ground plane * We can provide this antenna with a DC Open Circuit impedance ...

UHF Satcom MUOS Diplexer description DPLU-0310-680 MUOS Diplexer, isolates new MUOS Downlink (RX) signals from Uplink transmitted energy. It also manages Legacy and Modern waveforms available from MUOS payloads, enabling a single antenna to support all UHF Satcom modes supported by existing field radios. Currently, a separate RF connector is required for the MUOS WCDMA downlink. This Diplexer supports such requirement. Diplexers are bidirectional and linear. This means that the direction of a...

Custom VHF Preamplifier and Filter description User specified Custom VHF Preamplifier (LNA) and Filter, model LNAU-0150-648-CF, is a VHF LNA and Filter combined into a single device. It was designed with Software Defined Receivers (SDRs) in mind, which are notorious for performing poorly where there is a high density of signals in close proximity. This is particularly true of low-cost USB SDR dongles, which cover a wide spectrum of frequencies with a few components. The LNAU-0150-648-CF...

Puzzle: Double Phrases related to Electromagnetism, Fields and Antennas Download Puzzle (PDF)

The VL-1461-383 is a full-size, VHF omnidirectional antenna covering the Amateur 2 meter band (144-148 MHz). The internal radiating structure is balanced and complementary, and no ground plane is needed or required for normal operation. The antenna is housed in a Fiberglass enclosure making it rugged and tolerant to challenging environments. Internally, the feedpoint is DC shunted (short circuit) and electrically grounded (if mounted onto a grounded mast/structure), offering limited...

The VL-5201-383 is a half-size, omnidirectional antenna covering the Amateur 6 meter band (50-54 MHz). In spite of its small size, this antenna will rival any full size equivalent. The internal radiating structure is complementary, and no ground plane is needed or required for normal operation. The antenna is housed in a Fiberglass enclosure making it rugged and tolerant to challenging environments. Internally, the feedpoint is DC shunted (short circuit) and electrically grounded (if mounted...

The VL-4401-383 is a half-size, omnidirectional antenna covering the Low Band VHF Fire and Public Safety spectrum (42-46 MHz). In spite of its small size, this antenna will rival any full size equivalent. The internal radiating structure is complementary, and no ground plane is needed or required for normal operation. The antenna is housed in a Fiberglass enclosure making it rugged and tolerant to challenging environments. Internally, the feedpoint is DC shunted (short circuit) and...