ISM/FCC Part 15/Unlicensed Antennas

The UL-9150-360 ISM/RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in embedded, license free (ISM) and 800/900 MHz RFID applications. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, on the rare occasion when there are combustible gases present. Only the The RF connector's center conductor is not grounded. Such node is isolated to 50 Volts DC at...

The SL-520A-501 is a broadband, High Gain Antenna, providing continuous communications coverage across the spectrum of 4.4 GHz to 6.0 GHz and beyond. Its primary use is to enhance Wi-Fi network signals in 802.11a and 802.11n modes in the Americas, and in the US U-NII bands (5.150-5.350, 5.470-5.725 and 5.725-5.825 GHz). In Europe the SL-520A-501 will support 802.11h ETSI HiperLAN/1 (5.150-5.350 GHz) and HiperLAN/2 (5.470-5.725 GHz) applications simultaneously. . . and, in Asia, the very same...

The UL-235A-498 is a broadband, +11 dBil High Gain Antenna, providing continuous communications coverage across the spectrum of 2.2 GHz to 2.5 GHz and beyond. Its primary use is to enhance point-to-point Wi-Fi network signals in 802.11b and 802.11g modes (2.400-2.485 GHz), or those of licensed and unlicensed WiMax in the Americas (2.3 GHz, 2.5 GHz, 2.6 GHz, and 2.4 GHz). At most urban US locations, it may be used to enhance reception of Satellite Radio (SDARS) emissions between 2.320-2.345...

Leadtime: 1 Week ARO The UL-190A-B376 is a broadband directional antenna, providing continuous communications coverage across the spectrum of 750-3000 MHz. Its many applications include rapid deployment of emergency UHF communications, Hopping or Simultaneous Multiband Wireless LAN/MAN/WAN, military LOS operations, frequency hopping and jamming sources, spectrum monitoring and management, surveillance, radio scanners, global and wide area SCADA systems and metrology. You can now use a single,...

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating Frequency range: 800-900 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical...

The UL-1700-D345ISF is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

The UL-1700-D345ISM is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

The UL-1700-D345ISR is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating Frequency range: 850-950 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical...

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Frequency range: 415-421 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB)...

The UL-9001-333 RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in close proximity of or near RFID tags, particularly when the tag is placed on a large body, capable of detuning commonly used RFID reader antennas. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, in the unexpected event there are combustible gases present. Only the RF connector's center...

The UL-9001-333-CF Custom Frequency, Factory Tuned, Flat Antenna was developed for applications needing a temporary or relocatable solution that is small and economical. Use it with your wireless speakers, wireless modem, cellular phone (single band only), or any other radio device operating within the range of 600-2500 MHz. This antenna can be conveniently mounted to a glass surface, or to any other non-conducting material. It may be attached behind ordinary non-metallic structures, such as a...