Products 1-12 of 14
Show
Availability: approx. 2 weeks
Item #: UL-1400-D345ESF -
Dual Band EU Mobile 3G Antenna The UL-1400-D345ESF is a versatile, Dual Band, EU Mobile Phone/3G antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this 3G product with any Cellular/Mobile telephone, modem...
Availability: approx. 2 weeks
Item #: UL-1400-T345U -
Tri-Band US 3G Antenna + UMTS (834-896 MHz/1850-1990 MHz/2110-2170 MHz) Description The UL-1400-T345U is a versatile, Tri-Band, US Cellular and HSDPA/UMTS High Speed Wireless Modem antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed...
Availability: Approx 7 days
Item #: UL-1702-W660 -
Medium Power LTE Antenna description The UL-1702-W660, Medium Power LTE Antenna is designed to service the whole set of 4G LTE bands and services, from 700 MHz to 2200 MHz and frequencies in-between bands. It may be used in general purpose LTE (Long-Term Evolution) Cellular Modem applications, or with any mobile phone network compatible device. Its internal design supports RF power levels of 100 Watts average (CW). Its medium power level tolerance is beneficial in uses such as: Law Enforcement...
Availability: approx. 2 weeks
Item #: UC-1574-431R -
NSN No. 5985015756908 (SMA Male) Amplified/Active GPS/GNSS Antenna Description The UC-1574-431R is a Quadrifilar Helix Antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with GPS L1, 1.5754 GHz receivers and systems. It features a built-in, robust (+10 dBm IIP3, In -5 dBm/Out +18 dBm P1dB), +22 dB Low Noise Amplifier, preceded by a GPS filter, and followed by another GPS filter (2 filters). This combination of a small QFHA, a tough LNA and 2 filters, makes the UC-1574-431R an ideal antenna...
Availability: approx. 2 weeks
Item #: UL-1400-D345ESM -
The UL-1400-D345ESM is a versatile, Dual Band, EU Mobile Phone antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA...
Availability: approx. 2 weeks
Item #: UL-1400-D345USF -
Dual Band US Cellular Antenna Description The UL-1400-D345USF is a versatile, Dual Band, US Cellular antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem...
Availability: Approx 6-8 weeks
Item #: UL-190A-B376 -
Leadtime: 1 Week ARO The UL-190A-B376 is a broadband directional antenna, providing continuous communications coverage across the spectrum of 750-3000 MHz. Its many applications include rapid deployment of emergency UHF communications, Hopping or Simultaneous Multiband Wireless LAN/MAN/WAN, military LOS operations, frequency hopping and jamming sources, spectrum monitoring and management, surveillance, radio scanners, global and wide area SCADA systems and metrology. You can now use a single,...
Availability: Approx 7 days
Item #: UL-8500-319 -
A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating Frequency range: 800-900 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical...
Availability: approx. 2 weeks
Item #: UL-1400-D345USM -
The UL-1400-D345USM is a versatile, Dual Band, US Cellular antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA connector...
Availability: approx. 2 weeks
Item #: UL-9000-319 -
A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating Frequency range: 850-950 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical...
Availability: approx. 3-4 weeks
Item #: UL-2441-A223 -
UL-2441-A223, Broadband Omni Antenna Technical Specifications Frequency range: 1.2-2.8 GHz Coverage: Omni-directional Polarization: Linear, Vertical Gain: +2 to +4 dBil Nominal Impedance: 50 ohm (RF), Open Circuit (DC) with grounded radiating element VSWR: 2.0 Dimensions: Radome/Housing 5 cm (2") OD (max) x 7.6 cm (3") Height Mounting flange 7.75 cm (3.05") Diameter x 3 mm (0.12") thick Mounting: 8 x #6-32, 100° screws NOTES: Requires a ground plane (normally mounts on a metal body) This...
Availability: approx. 2 weeks
Item #: UL-9001-333 -
The UL-9001-333 RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in close proximity of or near RFID tags, particularly when the tag is placed on a large body, capable of detuning commonly used RFID reader antennas. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, in the unexpected event there are combustible gases present. Only the RF connector's center...