Low Profile for UAV/UUV & autonomous platforms

The UL-9150-360 ISM/RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in embedded, license free (ISM) and 800/900 MHz RFID applications. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, on the rare occasion when there are combustible gases present. Only the The RF connector's center conductor is not grounded. Such node is isolated to 50 Volts DC at...

IRIDIUM COMPATIBLE EQUIPMENT ("ICE") CERTIFIED NSN: 5985-01-654-7054 (UC-1624-341RS, currently UC-1624-341RSF) UC-1624-341R Data Iridium Antenna description The UC-1624-341R is a Quadrifilar Helix Iridium Antenna with dimensions 4 cm/1.5" OD x 11 cm/4.5" H. It is designed for use with L-band (1.6 GHz) Iridium modems and radios. The Iridium network the UC-1624-341R is designed for, consists of a meshed constellation of low earth orbiting satellites (LEO satellites). The constellation is large,...

EXPORT CONTROLS APPLICABLE Leadtime: 2 Weeks ARO SHF Broadband Omnidirectional Antenna, 3-8 GHz SHF Omni Antenna description The SL-5001-B357 is an SHF broadband omni-directional antenna for high bandwidth telemetry, LAN/WAN networking, low microwaves surveillance applications, UAV comms, etc. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates...

Medium Power LTE Antenna description The UL-1702-W660, Medium Power LTE Antenna is designed to service the whole set of 4G LTE bands and services, from 700 MHz to 2200 MHz and frequencies in-between bands. It may be used in general purpose LTE (Long-Term Evolution) Cellular Modem applications, or with any mobile phone network compatible device. Its internal design supports RF power levels of 100 Watts average (CW). Its medium power level tolerance is beneficial in uses such as: Law Enforcement...

Broadband, High-Gain Directional C-Band Antenna The SL-520A-501 is a broadband, High Gain Antenna, providing continuous communications coverage across the spectrum of 4.4 GHz to 6.0 GHz and beyond. Its primary use is to enhance Wi-Fi network signals in 802.11a and 802.11n modes in the Americas, and in the US U-NII bands (5.150-5.350, 5.470-5.725 and 5.725-5.825 GHz). In Europe the SL-520A-501 will support 802.11h ETSI HiperLAN/1 (5.150-5.350 GHz) and HiperLAN/2 (5.470-5.725 GHz) applications...

NSN No. 5985015756908 (SMA Male) Amplified/Active GPS/GNSS Antenna Description The UC-1574-431R is a Quadrifilar Helix Antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with GPS L1, 1.5754 GHz receivers and systems. It features a built-in, robust (+10 dBm IIP3, In -5 dBm/Out +18 dBm P1dB), +22 dB Low Noise Amplifier, preceded by a GPS filter, and followed by another GPS filter (2 filters). This combination of a small QFHA, a tough LNA and 2 filters, makes the UC-1574-431R an ideal antenna...

The UL-235A-498 is a broadband, +11 dBil High Gain Antenna, providing continuous communications coverage across the spectrum of 2.2 GHz to 2.5 GHz and beyond. Its primary use is to enhance point-to-point Wi-Fi network signals in 802.11b and 802.11g modes (2.400-2.485 GHz), or those of licensed and unlicensed WiMax in the Americas (2.3 GHz, 2.5 GHz, 2.6 GHz, and 2.4 GHz). At most urban US locations, it may be used to enhance reception of Satellite Radio (SDARS) emissions between 2.320-2.345...

3-4 GHz High Gain Directional Antenna Description The UL-360A-498 is a broadband, +11 dBil High Gain Antenna, providing continuous communications coverage across the spectrum of 2.8 GHz to 4.4 GHz and beyond. Its primary use is to enhance Private Networks or Citizen Band Radio System (CBRS) networks operating within the 3.55-3.70 GHz spectrum. Other key uses include Remote control of Drones or UAS (Unmanned Aerial Systems) operating on the 3.6 GHz band. The broadband nature of this Directional...

Typical leadtime is 2 weeks. This antenna was developed in response to the number of requests received for a Miniature VHF antenna. The VL-1500-335-CF (custom frequency) miniature VHF antenna is very small for its frequency of operation, and is intended for applications and users that cannot accommodate a large VHF mobile antenna on their vehicles, but require effective means of line of sight communications. The performance of the small "-335" antenna is remarkable at 1-2 "S" units lower than...

Small Combination Thuraya Antenna Description Under development UC-140A-T692L Technical Specifications Frequency range: 1525-1560, 1625-1660 MHz/1565-1585, 880-960, 1710-1880 MHz Coverage: Hemispherical/Monopole Polarization: Left-Handed, Circular (AR 2 dB)/Linear, Vertical Gain: +3 dBic/0 dBil Nominal Impedance: 50 ohm (RF) Input Power: 1 Watt CW/2 Watt CW VSWR: 2.0 Connector: 3x/2x U.FL female connectors on pigtails Dimensions: Housing 21 mm (0.81") OD x 63 mm (2.5") h ----------------------...

The UC-1574-341RS is a Quadrifilar Helix antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with L1 (1.5754 GHz) GPS receivers and systems. For embedded and weight sensitive applications (such as self-buoyant air and water platforms, like balloons and buoys), we offer a 30 gram (1 oz) lightweight version of the UL-1574-341R-LIGHT (select from above Base/Flange drop down menu). It is enclosed in a light housing, measuring 27.5 mm (1.08") OD x 99 mm (3.9") L, with an SMA Female connector at...

Small GNSS/GPS Antenna Description The Small GNSS Antenna, model UC-1574-653R, is a compact Quadrifilar Helix GPS Antenna, intended for reduced size, portable products. It is a lightweight QFHA and its internal design is tolerant to mechanical vibration, making it a better choice than ceramic patches for certain challenging environments. The UC-1574-653R attaches via a bottom SMA Female connector (UC-1574-653RS), or its 9/16"-18 threaded plastic base. An O-ring seals the interface from water....