Products 13-24 of 30
Show
Availability: approx. 2 weeks
Item #: UL-3001-343SN -
UL-3001-343S, 13" x 3/4" Rugged UHF SATCOM Portable Antenna (243-318 MHz) Description Leadtime: 2 weeks ARO This SATCOM antenna was designed for applications where a simple lightweight, very rugged, compact UHF antenna is needed. This product can mount directly onto the connector of a radio set. Three versions are offered to accommodate the various portable radios existing in the field. Alternatively, you may strap the UL-3001-343S to your backpack (as far away from your body, minimizing the...
Availability: approx. 2 weeks
Item #: UL-3001-343ST -
UL-3001-343S, 13" x 3/4" Rugged UHF SATCOM Portable Antenna (243-318 MHz) Description Leadtime: 2 weeks ARO This SATCOM antenna was designed for applications where a simple lightweight, very rugged, compact UHF antenna is needed. This product can mount directly onto the connector of a radio set. Three versions are offered to accommodate the various portable radios existing in the field. Alternatively, you may strap the UL-3001-343S to your backpack (as far away from your body, minimizing the...
Availability: approx. 3-4 weeks
Item #: UL-3001-456 -
UL-3001-456, 35" Spring Base VHF/UHF Line Of Sight (LOS)/SATCOM Antenna (225-450 MHz) Leadtime: 4 weeks ARO SPECIFICATIONS: Frequency range: 250-450 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical Peak Gain: 0 dBil Nominal Impedance: 50 ohm (RF), Short Circuit (DC) Input Power: 50 Watts CW VSWR: 3.0 over 90% of band GRAPH Dimensions: 3.2 cm (1.25") OD x 89 cm (35") L Mounting: direct, connector Operating Temperatures: -40C to +85C Weight: 2 kg / 4 lb...
Availability: Approx 3-4 Weeks
Item #: DPLU-0310-680 -
UHF Satcom MUOS Diplexer description DPLU-0310-680 MUOS Diplexer, isolates new MUOS Downlink (RX) signals from Uplink transmitted energy. It also manages Legacy and Modern waveforms available from MUOS payloads, enabling a single antenna to support all UHF Satcom modes supported by existing field radios. Currently, a separate RF connector is required for the MUOS WCDMA downlink. This Diplexer supports such requirement. Diplexers are bidirectional and linear. This means that the direction of a...
Availability: approx. 3-4 weeks
Item #: SPLU-3002-700 -
UHF LOS/Satcom 2-way 180° Combiner/Splitter/Stacker Two-way RF Splitter/Combiner designed to add or subtract the energies of 2 UHF Line of Sight (LOS) or UHF Satcom antenna elements. The combination of two properly spaced and aligned elements comprising an antenna array can produce a passive gain up to +5 dBil/dBic. The form factor of the SPLU-3002-700 is designed to accommodate 2 of our UL-3001-340SN, or similar antennas to produce a colinear array of +4 dBil to +5 dBil gain. Attach an...
Availability: approx. 3-4 weeks
Item #: SPLU-3002-711 -
LOS/Satcom Superdirective Endfire Array Feeder (2-way Phasing Splitter/Combiner) description The SPLU-3002-711 is an UHF Line of Sight (LOS)/Satcom Superdirective Endfire Array Feeder (2-way Phasing Splitter/Combiner) designed to produce a Supergain Endfire Array from two constituing elements directly mounted at its output ports. You can obtain an approx. 5 dBi unidirectional beam antenna by connecting two identical or similar omnidirectional antennas at each output. The terms "Superdirective"...
Availability: approx. 3-4 weeks
Item #: SPLU-3004-704 -
UHF Satcom 4-way Combiner/Splitter Four-way RF Splitter/Combiner designed to add the energies of 4 UHF Satcom antenna elements. The combination of four properly spaced and aligned elements comprising an antenna array can produce a passive gain up to +15 dBic. Antenna elements may be 4 of our X-wings (UC-3004-381R or UC-3004-481R) and a reflector, or 4 of our MILSATCOM Quadrifilar Helix (QFH) Antennas, model UC-3004-531R (no reflector required). This splitter/combiner is compatible with both...
Availability: approx. 3-4 weeks
Item #: UC-300-B5 -
UC-300-B5, UHF Satcom Antenna, CP Description Leadtime: 4 weeks ARO Antenna model UC-300-B5 is a lightweight, complete UHF Satcom antenna system. The polarization of this antenna is Circular (CP), intended for communications through satellites only. For dual and multi-purpose UHF Satcom applications, visit our custom antennas website at , or look at our other UHF Satcom product offerings at UHF SATCOM/LOS/DAMA/MUOS Antennas catergory within this store. SPECIFICATIONS: Operating Frequencies:...
Custom
Availability: approx. 2 weeks
Item #: UL-4000-319-CF -
Lead time is typically 2 weeks Custom Tuned UHF Mobile Radio Antenna, Description This item is identical to UL-4600-319 and others in the -319 series of Mobile Radio Antennas, except that the tuned frequency is specified by the client for a specific need. Lead Time for this item is 2 weeks, to allow our technicians to make the required adjustments to the specified frequency. This is a broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest...
Availability: 60 days ARO
Item #: UFL-0300-673 -
Tuneable UHF Cavity Bandpass Filter, Description This Tuneable UHF Cavity Bandpass Filter is a very sharp, narrowband, inline filter designed to enable communications where strong in-band signals exist, where a high degree of man-made noise prevents reliable communications, or where cohabitation with other transmitters is required. The UFL-0300-673 can be tuned to the intended operating frequency within frequencies spanning 225 MHz to 400 MHz (Aviation, Military UHF LOS bands). Use this filter...
Availability: approx. 2 weeks
Item #: UFL-3000-382 -
PRELIMINARY DATA The UFL-3000-382 is an inline filter designed to be inserted between a UHF SATCOM antenna and military communications gear. It features opposite gender connectors at each end, so it can be inserted without the need of an adaptor. They are also weatherproof for tactical use. Use this filter when operating in challenging or hostile Electromagnetic environments, to relieve your radio's front end from having to contend with large amounts of integrated power, which can lower...