Accessories

Mount for 383 Series Omnidirectional Antennas, description The ACC-0007 Mount is compatible with all of our -383 series Onidirectional Antennas. Usually it is used in pairs for maximum strength: with one Mount near the top and one near the bottom of the antenna's Aluminum ferrule (approximately spanning the full length of the ferrule), to provide the strongest support for the antenna. They are sold individually, and in pairs (dropdown menu) for installations where the bottom or the top of the...

ACC-A328M Mast Mount description Mast Mount for all -328/-513 series UHF Satellite Antennas in our catalog. The Mount is comprised of two separable parts: a Mounting Plate and a Mast Adapter. The Mounting Plate is specific to -328 & -513 devices, containing 4 threaded holes matching the antenna's bolt circle. The Mast Adapter is fairly universal, as it is compatible with many other of our products. Both parts are made of structural 6061-T6 grade Aluminum. The ACC-A328M Mast Mount is used...

ACC-A345M Mast Mount description Mast Mount for all single 1/4"-20 screw mounted Antennas in our catalog. Compatible with UC-1624-341R Iridium, UC-1614-341L Thuraya, UL-5001-B357, all models ending in -345, -341, -431, etc. For added versatility, this Mount will is also support our ACC-5001 Ground Plane, to further enhance the performance of the target antenna. By use of a ground plane, the gain of the antenna listed and compatible is doubled, or added 3 dB. This is due to the exclusion of...

Accessory: Mast Mount for UL-190A-B376 Antenna The ACC-A376M Mast Mount is used to install a UL-190A-B376 Antenna on a mast structure with an outside diameter of up to 38 mm (1.5"). The Mast Mount includes two U-Bolts and four 1/4"-20 screws, plus their respective nuts, to securely fasten a UL-190A-B376 antenna. Hardware is Stainless or Coated Steel.

Accessory: Mast Mount for SL-520A-501 Antenna The ACC-A501M Mast Mount is used to install a SL-520A-501 Antenna on a mast structure with an outside diameter of up to 38 mm (1.5"). The Mast Mount includes two U-Bolts and four #6-32 screws, to securely fasten a SL-520A-501 antenna. Hardware is Stainless or Coated Steel.

ACC-A531M Mast Mount description Mast Mount for all -531 series VHF Satellite Antennas in our catalog. The Mount is comprised of two separable parts: a Mounting Plate and a Mast Adapter. The Mounting Plate is specific to -531 devices, containing 8 threaded holes matching the antenna's bolt circle. The Mast Adapter is fairly universal, as it is compatible with many other of our products. Both parts are made of structural 6061-T6 grade Aluminum. The ACC-A531M Mast Mount is used to install the...

ACC-E328M Elevation over Azimuth Mast Mount description EL/AZ Mast Mount for all -328/-513/-531 series UHF Satellite Antennas in our catalog. The Mount is comprised of two separable parts: a Mounting Plate and a Mast Adapter. The Mounting Plate is specific to -328, -513 & -531 (UHF) devices, containing 4 threaded holes matching the antenna's bolt circle. The Mast Adapter is fairly universal, as it is compatible with many other of our products. Both parts are made of structural 6061-T6...

ACC-M496 Magnetic Mount description Magnetic Mount for all -496 series VHF Mobile Antennas in our catalog. The ACC-M496 Mount is made to tightly couple to the a vehicle's chassis at frequencies above 50 MHz, allowing its VHF or UHF antenna to operate without impairment.

Accessory: UHF Ground Plane, 30 x 30 cm (12" x 12") Accessory: UHF Ground Plane, for use as a counterpoise/shield at frequencies above 500 MHz. To exploit the ACC-5001 as a reflector, it is best to use it above 800 MHz; however, it may be utilized as such down to 600 MHz with a reduced Front-to-Back ratio. Operation of the ACC-5001 as a counterpoise (groundplane) below 500 MHz will generally result in a downtilt of the antenna's pattern mounted on it. Said downtilt is gradual and a function of...