1 - 2 GHz (L-band)

UL-2441-A223, Broadband Omni Antenna Technical Specifications Frequency range: 1.2-2.8 GHz Coverage: Omni-directional Polarization: Linear, Vertical Gain: +2 to +4 dBil Nominal Impedance: 50 ohm (RF), Open Circuit (DC) with grounded radiating element VSWR: 2.0 Dimensions: Radome/Housing 5 cm (2") OD (max) x 7.6 cm (3") Height Mounting flange 7.75 cm (3.05") Diameter x 3 mm (0.12") thick Mounting: 8 x #6-32, 100° screws NOTES: Requires a ground plane (normally mounts on a metal body) This...

The UC-1574-341RM is a Quadrifilar Helix antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with GPS L1, 1.5754 GHz receivers and systems. SPECIFICATIONS: Frequency range: 1565-1585 MHz Coverage: Hemispherical Polarization: Right-Handed, Circular (AR 3 dB) Gain: +3 dBic Nominal Impedance: 50 ohm (RF) Input Power: 1 Watt CW VSWR: 2.0 GRAPH Connector: MMCX, Male on a low loss, 24" Flexible RG-405 cable Dimensions: Housing 4 cm (1.5") OD x 11 cm (4.5") h Bottom flange 5 cm (2") OD x 13 mm...

The UC-1574-341RMA is a Quadrifilar Helix Antenna (4 cm/1.5" OD x 11 cm/4.5" H) designed for use with GPS L1, 1.5754 GHz receivers and systems. It features a built-in, robust (+24 dBm IIP3, +20 dBm P1dB), +10 dB Low Noise Amplifier with a dual, high rejection GPS filter (greater than 60 dB rejection of out of band signals). This combination of a small QFHA, a tough LNA and a high-rejection filter makes the UC-1574-341RMA an ideal antenna for harsh electromagnetic environments, or in...

Dual-band ADS-B In Antenna Description Low Power ADS-B Antenna, Model UL-1031-333, supports dual band ADS-B In receivers in a thin and lightweight form factor. Its operation covers the entire range of 950-1150 MHz, which includes the light craft (under 18,000 ft) frequency of 978 MHz, the Mode S interrogator frequency of 1030 MHz, and the large aircraft (above 18,000 ft) ADS-B frequency of 1090 MHz. Enthusiasts may use this device, together with an ADS-B, or low-cost SDR (Software Defined...

Embeddable Flat Antenna, Custom Frequency The UL-9001-333-CF Custom Frequency, Factory Tuned, Flat Antenna was developed for applications needing a temporary or relocatable solution that is small and economical. Use it with your wireless speakers, wireless modem, cellular phone (single band only), or any other radio device operating within the range of 600-2500 MHz. This antenna can be conveniently mounted to a glass surface, or to any other non-conducting material. It may be attached behind...

This antenna was designed to specifically convert poorly performing Cellular phones into HAC (Hearing Aid Compatibility) compliant. In doing so, it also reduces the absorption of the radiated energy by the user's tissue, particularly by the head and regions near the ear. This little known parameter of a wireless phone is regulated by Government bodies at a maximum level of 1.6 Watt/kg of tissue. You can find your phone's SAR rating at the bottom of your phone's Specifications Sheet, in your...

This antenna was designed to specifically convert poorly performing Cellular phones into HAC (Hearing Aid Compatibility) compliant. In doing so, it also reduces the absorption of the radiated energy by the user's tissue, particularly by the head and regions near the ear. This little known parameter of a wireless phone is regulated by Government bodies at a maximum level of 1.6 Watt/kg of tissue. You can find your phone's SAR rating at the bottom of your phone's Specifications Sheet, in your...