500 - 1000 MHz (UHF)

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating Frequency range: 800-900 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical...

The UL-1400-D345USM is a versatile, Dual Band, US Cellular antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any Cellular/Mobile telephone, modem or transceiver, having an SMA connector...

The UL-1700-D345ISF is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

The UL-1700-D345ISM is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO TECHNICAL SPECIFICATIONS: Frequency range: 0.7-7.0 GHz Coverage: Broadside Polarization: Circular, RHCP or LHCP, depending on mounting orientation Gain: -2 to +2 dBic Nominal Impedance: 50 ohm (RF), Short Circuit (DC)* VSWR: 3.0 GRAPH Connector: SMA, Female Size: 31 cm (12") x 31 cm (12") x 1 cm (.4") NOTES: Does not require a ground plane * We can provide this antenna with a DC Open Circuit impedance ...

The UL-1700-D345ISR is a versatile, Dual Band, ISM/license free spectrum antenna. It measures 4 cm/1.5" OD x 11 cm/4.5" H and is designed to conveniently mount onto any structure, by means of a single 1/4" (6.4 mm) hole. Its internal radiating structure is self-contained and operates well with or without a ground plane. Therefore, it can be mounted on a non-conductive support, as needed by your application. Use this product with any 900 MHz and/or 2.4 GHz modem, WLAN, transceiver or data link,...

Lead time is typically 2 weeks Custom Tuned UHF Mobile Radio Antenna, Description This item is identical to UL-4600-319 and others in the -319 series of Mobile Radio Antennas, except that the tuned frequency is specified by the client for a specific need. Lead Time for this item is 2 weeks, to allow our technicians to make the required adjustments to the specified frequency. This is a broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest...

A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating Frequency range: 850-950 MHz Coverage: Omni-directional, low azimuthal ripple (1 dB) Polarization: Linear, Vertical...

Dual-band ADS-B In Antenna Description Low Power ADS-B Antenna, Model UL-1031-333, supports dual band ADS-B In receivers in a thin and lightweight form factor. Its operation covers the entire range of 950-1150 MHz, which includes the light craft (under 18,000 ft) frequency of 978 MHz, the Mode S interrogator frequency of 1030 MHz, and the large aircraft (above 18,000 ft) ADS-B frequency of 1090 MHz. Enthusiasts may use this device, together with an ADS-B, or low-cost SDR (Software Defined...

The UL-9001-333 RFID/Low Power application antenna and RF coupler was developed in response to catalog visitor requests. This antenna was designed for use in close proximity of or near RFID tags, particularly when the tag is placed on a large body, capable of detuning commonly used RFID reader antennas. Exposed metal surfaces within the antenna are grounded to the RF connector's shield, as a precaution, in the unexpected event there are combustible gases present. Only the RF connector's center...

Embeddable Flat Antenna, Custom Frequency The UL-9001-333-CF Custom Frequency, Factory Tuned, Flat Antenna was developed for applications needing a temporary or relocatable solution that is small and economical. Use it with your wireless speakers, wireless modem, cellular phone (single band only), or any other radio device operating within the range of 600-2500 MHz. This antenna can be conveniently mounted to a glass surface, or to any other non-conducting material. It may be attached behind...

Uses include: Ardis modem, Cellular phones, Cellular network telemetry/SCADA, automatic metering, ISM devices, 900 MHz communications, wireless LAN/MAN/WAN. Frequency: 800-950 MHz Coverage: Omni directional (azimuth) Polarization: Linear, Vertical Gain: +2 dBil Ground Plane: Requires no ground plane Nominal Impedance: 50 ohm (RF), Short Circuit (DC) for ESD protection (ESD = Electro-Static Discharge) VSWR: 2.0 Dimensions: 21.6cm (8.5") H x 1.3cm (1/2") OD Connector: SMA, Male, Right Angle on...