Products 37-48 of 65
Show
Availability: approx. 2 weeks
Item #: VL-9801-383 -
The VL-9801-383 is an omnidirectional antenna covering the entire VHF FM Broadcast Band (88-108 MHz). The internal radiating structure is complementary and broadband. No ground plane is needed or required for normal operation. The antenna is housed in a Fiberglass enclosure making it rugged and tolerant to challenging environments. Internally, the feedpoint is DC shunted (short circuit) and electrically grounded (if mounted onto a grounded mast/structure), offering limited electrostatic...
Availability: Approx 6-8 weeks
Item #: UL-1501-B384 -
EXPORT CONTROLS APPLICABLE Leadtime: 4 Weeks ARO PRELIMINARY DATA The UL-1501-B384 is a broadband, omnidirectional antenna intended for receive only applications, such as Electromagnetic Surveillance, Spectrum Monitoring and Metrology applications. This antenna requires a ground plane for normal operation. It features a built-in, Low Noise Amplifier (LNA), capable of spanning from 100 MHz to 3 GHz, and of surviving a total aggregate input power of 20 mW, and producing a linear response to...
Availability: approx. 2 weeks
Item #: UL-4050-414 -
EU TETRA Antenna/UHF Train Antenna (380-430 MHz) A broadband, rugged, low profile antenna designed to service TETRA UHF Bands used in EMS (Emergency Medical Services), Law Enforcement, Government and Civil services, and featuring a DC grounded radiating element. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +4 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. Internally, the radiating...
Availability: Approx 7 days
Item #: UL-4400-319 -
A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....
Availability: approx. 3-4 weeks
Item #: UL-4500-390 -
A broadband, rugged, in-building or outdoor antenna designed to service the whole 430-470 MHz UHF band, used in EMS (Emergency Medical Services), Law Enforcement, Government and Civil services, and featuring a DC grounded radiating element. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +1 dBil. Internally, the radiating element is DC shunted to help protect the transceiver from nearby, but not direct...
Availability: approx. 2 weeks
Item #: UL-5000-319 -
A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....
Custom
Availability: Out of Stock
Item #: VL-1500-496-CF -
Low-Profile VHF Mobile Antenna, Custom Tuned Model VL-1500-496-CF is a small VHF Antenna, Custom Tuned to your specified center frequency between 100 MHz and 300 MHz, designed for mobile platforms (vehicles) with height restrictions. Measuring only approximately 4" (10 cm) in diameter and 6" (15.3 cm) tall, this antenna is a very efficient Low Profile radiator. When installed properly on the metal chassis of a vehicle, the VL-1500-496-CF will perform comparably with a full size 1/4 wave...
Availability: Approx 7 days
Item #: VL-2901-D496 -
Model VL-2901-D496 is a small Amateur Dual Band, VHF/UHF Antenna (145-148 MHz, 2m and 420-450 MHz, 70cm Amateur Radio Bands), designed for mobile platforms (vehicles) with height restrictions. Measuring only approximately 4" (10 cm) in diameter and 6" (15.3 cm) tall, this antenna is a very efficient Low Profile radiator. When installed properly on the metal chassis of a vehicle, the VL-2901-D496 will perform comparably with a full size 1/4 wave monopole antenna. For optimum operation, install...
Availability: approx. 2 weeks
Item #: UL-4500-414 -
Wideband, Low Profile Transit Antenna/UHF Train Antenna (430-470 MHz) A broadband, rugged, mobile radio antenna designed to service the whole 430-470 MHz UHF band, featuring a DC grounded radiating element. It may be used as a UHF Train Antenna on locomotives and Railroad related applications, such as End-of-Train Devices (EOT/ETD) or Head-of-Train Devices (HOT/HTD). It is also ideally suited as a Transit Antenna, for installation on buses, subway/metropolitan rail assets and stations, or as a...
Availability: approx. 2 weeks
Item #: UL-4800-319 -
A broadband, rugged, mobile radio antenna featuring a high ESD (ElectroStatic Discharge) isolation. With modest dimensions of 1.5"/4 cm (OD) x 4"/10 cm (height), this antenna radiates with a typical peak omnidirectional gain of +5 dBil, when mounted on a large metal surface of at least 16"/40 cm radius. This antenna will survive a 20 ft drop onto asphalt and continue operating (see Drop Test results) Internally, the radiating element is DC grounded and the feedpoint is DC isolated beyond 1 kV....
Availability: approx. 3-4 weeks
Item #: UC-300-B5 -
UC-300-B5, UHF Satcom Antenna, CP Description Leadtime: 4 weeks ARO Antenna model UC-300-B5 is a lightweight, complete UHF Satcom antenna system. The polarization of this antenna is Circular (CP), intended for communications through satellites only. For dual and multi-purpose UHF Satcom applications, visit our custom antennas website at , or look at our other UHF Satcom product offerings at UHF SATCOM/LOS/DAMA/MUOS Antennas catergory within this store. SPECIFICATIONS: Operating Frequencies:...